What kind of lights should I use? Cheap 4 ft. cool white fluorescent tubes : for germination/seedlings. 400 - 600 watt Metal Halide/HPS : for personal home growers. watt halide/HPS : for some personal growers and commercial growers. Recommended to properly replicate the power of the sun. Use at least 40 watts per sq. foot of grow space.* Get lights online or at some local hardware stores or Hydroponics grow shop.The vast majority of our products are held in stock and you will be notified of any potential delay.
What is pH? It is a measure of the acidity or alkalinity of a solution, numerically equal to 7 for neutral solutions. Value of pH increases with increasing alkalinity and decrease with increasing acidity. We recommend that you keep your solution at pH of about 6.
What is the difference between High Pressure Sodium and Metal Halide? The difference between these two types of HID (High Intensity Discharge) lights is the color spectrum that is emitted from each. The High Pressure Sodium bulb emits light that is concentrated in the red to yellow side of the spectrum and is weak in the blue-violet end. While the Metal Halide bulb emits light that is very balanced and contains all the energy peaks at wavelengths of the visible spectrum.Quite often this is the case because the plants grown utilizing hydroponics have all the essential nutrients readily available to the plant. In soil the important micro nutrients are often locked away in the soil where the plants cannot take full advantage of these minerals.
What is Hydroponics ? Hydroponics is the method of growing plants using a soilless media which could include a wide variety of examples like: gravel, peat, vermiculite Perlite, old rubber tires, rockwool, and expanded clay aggregates. The minerals that the plant needs are dissolved into the water which is then watered directly to the plants. So, in short instead of the plants searching throughout the soil for their minerals they draw them directly from the water that they are being fed.There is no energy savings from running your lights at 240 volts. That is a misconception that many people have. The main advantage is the fact that you can run more lights on one electrical circuit.
What is the difference between High Pressure Sodium and Metal Halide? The difference between these two types of HID (High Intensity Discharge) lights is the color spectrum that is emitted from each. The High Pressure Sodium bulb emits light that is concentrated in the red to yellow side of the spectrum and is weak in the blue-violet end. While the Metal Halide bulb emits light that is very balanced and contains all the energy peaks at wavelengths of the visible spectrum.It is easy to verify our company exists. (We are company number 04418462.) Additionally, if we did not send goods, the news would spread quickly and we would end up without a business, which after all the hard work we've put into it, would be ridiculous. Also one of the main reasons that we put our business on the web is to provide the good, honest and efficient service that our customers deserve.No.
What about security when I pay by credit card? We use SSL technology combined with PGP encryption to ensure your details are safe. We also use AVS [Address Verification System] anti-fraud technology to protect ourselves and the public. The SSL is Thwate approved.The optimal temperature of the nutrient solution should be in the range of 65 to 75 degrees Fahrenheit. Most of the fertilizers readily available are very general purpose mixes that do not work well for all types of plants. The nutrients that we sell are made specifically for plants grown in hydroponics systems that utilize sterile growing mediums.
About the Author:
We scoured every corner of the internet to find everything
No comments:
Post a Comment